9041[X] - Two-color / broadband pump-probe

90411


The pump probe technique is a widely used ultrafast spectroscopy method allowing to study the ultrafast dynamics of light-matter interactions.  This method uses two light pulses, typically of different wavelengths and intensities, which are spatially overlapped with high precision and whose relative time delay is controlled with a delay line capable of micrometric translation.  The nominal paths taken by the pump and the probe need to be equal to an extremely high degree of accuracy.  The opto-mechanical requirements for such setups are therefore very high and the alignment is very tedious and demanding.

The 3DOptix breadbox-based pump-probe reference design removes all of these hurdles from the equation, allowing the user to build a pump-probe setup in record time with minimal alignment necessary.  This way, you can focus on the experiment itself and its results rather than spending valuable time and resources on setting things up. 

Part Number
Broadband Pump Probe Ø1"/25mm
Price per unit
Basic Closed Box
Qty Price Qty Price
20010 / 20010-M Premium Box Frame - Wall frame 9 (3X3) mount locations $95 1 $95 2 190
20020 / 20020-M Premium Box Frame - Floor/ceiling 9 (3X3) mount locations $95 3 $285 6 570
20018 / 20018-M Premium Box Frame - Wall frame 4 (1X4) mount locations $77 3 $231 6 462
20022 / 20022-M Premium Box Frame - Floor/ceiling 3 (1X3) mount locations $72 3 $216 3 216
20600 / 20600-M Translator Box Frame – Floor/ceiling 9 (3X3) mount locations $109 1 $109 1 109
20100 / 20100-M Fixed Mount - Triangular Ø1"/25mm Mirror/DM Mount $59 6 $354 6 354
20200 / 20200-M Triangular Kinematic Mirror Mount Ø1"/25mm $125 4 $500 6 750
20502 / 20502-M Iris Mount Ultimate $94 1 $94 1 94
20550 / 20550-M 1X1 Square Mount for Ø1"/25mm Optical Elements $64 2 128
Total $1,884 Total $2,873

 

* Shipment time - 4 weeks 

Included Hardware and Screws
Qty for Basic
Imperial: 4-40 Cap Screw, 1/4" Long
41
Metric: M2.5-0.45mm Cap Screw 6mm Long
2.5mm 18-8 Stainless Steel Dowel Pins 16
Aluminum Unthreaded Spacer - 1/8" Long, 5/8" Outside Diameter 2

  

The 3DOptix optomechanical elements are compatible with optical elements from any major company.

The recommended elements may vary depending on the specific spectral needs of the setup. 

Recommended third party optical/optomechanical elements Qty
Metallic/Dielectric mirrors 8
Ø1"/ 25mm Dichroic mirrors 45° AOI 2
Threaded Iris Diaphragm, SM1 (1.035" - 40) 1
1" Lens Tube, SM1 (1.035" - 40) 2
Retaining Ring, SM1 (1.035" - 40) 2
Fluorescing Alignment Disks 2
Travel Linear Translation Stage compatible with manual and motorize heads for 1" translator height - Spacers/Washers are provided as part of the reference design.
Translator + Spacers/Washers height should be - 1.125'' / 28.12mm
1
Ø1/2"/12.5mm Post Holder, 1.5"/37.5mm Long 2
Ø1/2"/12.5mm Post, 1"/25mm Long 2
1/4"-20 Stainless Steel Cap Screw, 3/8" Long
4

 

 Broadband Pump Probe Assembly Instructions

 

Broadband Pump Probe Clip


Related Items